Frequency (GHz) Output Power

Output Power w/Step Attenuator

0.01 – 2.0 GHz+13.0 dBm

+11.0 dBm

2.0 – 20.0 GHz+9.0 dBm

+7.0 dBm

20.0 – 40.0 GHz+6.0 dBm

+3.0 dBm

CW Mode

Output

Twenty independent, presettable CW frequencies (F0 – F9 and M0 – M9)

Accuracy

Same as internal or external 10 MHz time base

Internal Time Base Stability

With Aging:

<2 x 10 -8 /day (<5 x 10 –10 /day with Option 16)

With Temperature:

<2 x 10 -8 /C over 0C to 55C (<2 x 10 -10 /C with Option 16)

Resolution

1 kHz (0.1 Hz with Option 11)

External 10 MHz Reference Input

Accepts external 10 MHz 100 Hz, 0 to +10 dBm time base signal. Automatically disconnects the internal high-stability time-base option, if installed. BNC, rear panel, 50 Ohmn impedance

10 MHz Reference Output

0.5 Vp-p into 50 Ohmn, AC coupled. Rear panel BNC; 50 Ohmn impedance

Switching Time (typical maximum)

<40 ms to be within 1 kHz of final frequency

Analog Sweep Mode

Sweep Width

Independently selected from 1 MHz to full range continuous sweep

Accuracy

The lessor of: 30 MHz or (2 MHz + 0.25% of sweep width) for sweep speeds of ≤50 MHz/ms.

Sweep Time Range

30 ms to 99 seconds

Phase-Locked Step Sweep Mode

Sweep Width

Independently selected, 1 kHz (0.1 Hz with Option 11) to full range. Every frequency step in sweep range is phase-locked

Accuracy

Same as internal or external 10 MHz time base

Resolution (Minimum Step Size)

1 kHz (0.1 Hz with Option 11)

Steps

User-selectable number of steps or the step size

Number of Steps

Variable from 1 to 10,000

Step Size

1 kHz (0.1 Hz with Option 11) to the full frequency range of the instrument. (If the step size does not divide into the selected frequency range, the last step is truncated.)

Dwell Time Per Step

Variable from 1 ms to 99 seconds

Switching Time (typical maximum)

<15 ms + 1 ms/GHz step size or <40 ms, whichever is less

Alternate Sweep Mode

Sweeps alternately in analog or step sweep between any two sweep ranges. Each sweep range may be associated with a different power level

Manual Sweep Mode

Provides stepped, phase-locked adjustment of frequency between sweep limits. User-selectable number of steps or step size. 360B VNA SOURCE LOCK MODE

Under control of the ANRITSU 360B Vector Network Analyzer, the synthesized signal generator is phase-locked at a typical <8.5 ms/